EarthQuaker Devices Avalanche Run V2 Delay and Reverb Pedal
EarthQuaker Devices Avalanche Run V2 Delay and Reverb Pedal. Condition: Brand New in Original Packaging. Standard 9V DC power supply. The EarthQuaker Devices Avalanche Run V2 Delay and Reverb Pedal is a dreamy stereosonic exploratory multi-tool that includes up to 2 seconds of delay time, reverse delay, tap tempo with subdivision control, switchable true bypass, or buffered bypass with 5 different tail lengths (including a sound-on-sound style lo-fi looping mode) and an assignable expression control that maps the expression jack to control of your choice, including the toggle. The delay section allows tweaking from tape emulation to bucket brigade styles with a twist of the wide-range Tone control. The cavernous, plate-style reverb has just a touch of modulation similar to the one found in our precious Dispatch Master only more lush with an adjustable Decay. Otherworldly reverse delay and dynamic swelling reverb settings are accessible through a 3-way toggle switch. This controls the delay time and goes from 0ms to just under 2000ms. Controls the regeneration of the delay, from zero repeats to near infinite. Controls the tone for the delay line only. Roll-off highs to the left, roll off lows to the right and get a flat response in the middle. This is the volume control for the delay line. This blends in the wet with dry until 1 o'clock, 1 o'clock to 3 o'clock boosts the wet signal over the dry, and 3 o'clock up brings down dry until it is fully wet when up. Use this switch to map the expression jack to one of the assigned controls. The decay control helps control the reverb decay length. The R mix controls the reverb mix. This takes over for the delay time control and is drastically different than the interface control. Using the expression pedal to control the time will give you all kinds of wild effects that can not be achieved by turning the knob. This takes over for the toggle switch and will crossfade from forwarding delay in heel down position to reverse delay in toe down position. Selects delay subdivisions when time is set by the'Tap' switch. Controls the decay length of the reverb, short decay counterclockwise, long cavernous decay clockwise.
This is the volume control for the reverb. It blends in the wet with dry until 1 o'clock, 1 o'clock to 3 o'clock boosts the wet signal over the dry, and 3 o'clock up brings down dry until it is fully wet when up. What's in the Box. Dimensions: (118 x 105 x 57 mm) 4.65 x 4.15 x 2.25 inch with knobs. 24-bit 96kHz A/D and D/A converters.
All analog dry signal path. All digital wet signal paths with 20Hz - 20kHz frequency response.
The expression jack is located on the west side of the pedal. It is a TRS jack with the tip acting as the wiper. We recommend using a Moog expression pedal with the output adjustment knob all the way up. We cannot guarantee any other expression pedal to work with the Avalanche Run. This device features Flexi-Switch® Technology!
This relay-based, true bypass switching style allows you to simultaneously use momentary and latching style switching. For standard latching operation, tap the footswitch once to activate the effect and then tap again to bypass. For momentary operation, hold the footswitch down for as long as you'd like to use the effect. Once you release the switch the effect will be bypassed. Since the switching is relay-based, it requires power to pass signal.
For best results, please use the included 9v center-negative 1-amp DC power supply. PCBs populated by a combination of artificial and human intelligence in the Akron, Ohio of America. Each and every Avalanche Run is completely assembled, wired and tested by total human beans in the tiny tundra town of Akron, Ohio.
F There are product categories which are not returnable due to hygienic or sanitary as required by manufacturers. In an event where there is an error regarding a price error or description, we will notify you ASAP. Items removed from their'blister-pack' display packaging are non-refundable. Please let us know how we can make yours a five-star rated one too! Our goal is to make sure you are customer 100% satisfied with your order.This item is in the category "Musical Instruments & Gear\Guitars & Basses\Parts & Accessories\Effects Pedals\Delay, Echo & Reverb". The seller is "focuscamera" and is located in this country: US. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech Republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, Sweden, South Korea, Indonesia, Taiwan, South Africa, Thailand, Belgium, France, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi Arabia, United Arab Emirates, Qatar, Kuwait, Bahrain, Republic of Croatia, Malaysia, Brazil, Chile, Colombia, Costa Rica, Panama, Trinidad and Tobago, Guatemala, Honduras, Jamaica, Antigua and Barbuda, Aruba, Belize, Dominica, Grenada, Saint Kitts-Nevis, Saint Lucia, Montserrat, Turks and Caicos Islands, Barbados, Bangladesh, Bermuda, Brunei Darussalam, Bolivia, Ecuador, Egypt, French Guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman Islands, Liechtenstein, Sri Lanka, Luxembourg, Monaco, Macau, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Vietnam.
- MPN: EQDAVALV2USA
- UPC: 855755007183
- Manufacturer: EarthQuaker Devices
- EAN: 0855755007183
- Brand: EarthQuaker Devices
- Type: Reverb, Delay
- Analog/Digital: Digital
- Model: Avalanche Run V2
- To Fit: Acoustic Electric Guitar, Electric Guitar, Bass Guitar